Filtering

Zodiac FloPro 100M mono speed pump
FloPro pumps are designed with corrosion-resistant materials. The body of the pump is made of very thick glass fiber reinforced polypropylene, which makes it long-lasting and silent. Equipped with highly energy-efficient synchronous motors, the range is available in 9 models (from 0.5 to 2.0 HP) to meet the needs of most pools.
Astralpool Sail Filter for swimming pool mod.600
€483.00
€690.00 -30%
Available in 5/6 days
Astralpool Sail Filter for swimming pool mod.600. Manufactured in polyester resin and fiberglass, with excellent finishes. Equipped with a transparent cover with a ring-shaped closure with a screw, and 1 "threaded easy-to-remove manifold arms. The connections for the 6-position selector valve include filtration, discharge, closing, washing, rinsing and recirculation. Equipped with water and air discharge pressure gauge manual Maximum operating pressure 2.5 bar.
Astralpool Artic Filter OC-1 diam. 1200 mm 1.2 m filtering bed
€4,475.10
€6,393.00 -30%
Available in 5/6 days
Astralpool Artic Filter OC-1 diam. 1200 mm 1.2 m filtering bed, made with polyester resin and ivory-colored fiberglass, with an excellent external finish and internal gel-coat coating. Filter bed height 1 m with 3 "connections. Upper cover in black ABS with 400 mm diameter. Equipped with special candles with 3 mm openings, PVC connections, manual air vent, and filter media drain 200 mm diameter. Filter Compatible with OC-1, not suitable for sand, glass or other filter materials.
Astralpool Florida High-performance sand filter 31 m ^ 3 / h
€791.70
€1,131.00 -30%
Available in 5/6 days
Astralpool Florida High-performance sand filter 31 m ^ 3 / h, made of polyester laminated with turquoise-colored fiberglass. Available with connection for side or top valve. 900 mm in diameter and 2 "connections. Equipped with pressure gauge and discharge valve. Selector valve not included. We recommend using zeolite or a glassy filter bed for better filtration.
Astralpool Aster Filter Ø 750 mm output 2″
€1,369.90
€1,957.00 -30%
Available in 5/6 days
Astralpool Aster Filter Ø 750 mm output 2″, the filters are manufactured with polyester resin and fiberglass. The highness filtering layer is of 0,8m, That gives a major quality of filtration than the residential filter this increases the capacity to withholding the little particles. Prolongs the time saturation filtration of the layers saving energy consumption, water consumption and chemical products. The filter can be used as a single layer or multi-layer combine sand with gravel, glass or anthracite. Fast opening lid. Sand drain of 2 1/2″ in the bottom part of the filter. Optional sand drain d.200mm. Optional interior finishing with vinylester for ozone treatment
Astralpool Artic Plus filter 1050 mm diameter
€3,614.10
€5,163.00 -30%
Available in 5/6 days
Astralpool Artic Plus filter 1050 mm diameter, 3” connections, collector arms -Laminated filter in polyester with fibreglass totally anticorrosive.  -High performance filter with filtration bed height of 1,2 m. -Collector arms system made of PP with 0,3 mm slots, uniformly distributed in order to achieve a correct circulation of the water.  - D400 mm lid, with AISI-316 stainless steel screws. -Gaskets in EPDM.  - Very important: please notify if the installation will use sea water, if the backwash is done with air or with air/water and if the installation is outside.
Astralpool Pump Victoria Plus Silent VS – 1CV
€1,085.00
€1,550.00 -30%
Available in 5/6 days
Astralpool Pump Victoria Plus Silent VS – 1CV, for residential pools comes with a 1 hp or 2 hp motor, has variable speeds and can be automatically controlled. This pump has been designed for both new-build pools and as a replacement for pumps already fitted. Significant power savings can be made thanks to the use of variable speeds and the timer.
Zodiac FloPro 100T variable speed pump
FloPro pumps are designed with corrosion-resistant materials. The body of the pump is made of very thick glass fiber reinforced polypropylene, which makes it long-lasting and silent. Equipped with highly energy-efficient synchronous motors, the range is available in 9 models (from 0.5 to 2.0 HP) to meet the needs of most pools.
Astralpool Sail Filter for swimming pool mod.750
€739.20
€1,056.00 -30%
Available in 5/6 days
Astralpool Sail Filter for swimming pool mod.750. Manufactured in polyester resin and fiberglass, with excellent finishes. Equipped with a transparent cover with a ring-shaped closure with screw, and 1 "threaded easy-to-remove manifold arms. The connections for the 6-position selector valve include: filtration, discharge, closing, washing, rinsing and recirculation. Equipped with water and air discharge pressure gauge manual Maximum operating pressure 2.5 bar.
Astralpool Vesuvio Industrial filters Ø 1600 mm outlets 90 mm
€3,360.00
€4,800.00 -30%
Available in 5/6 days
Astralpool Vesuvio Industrial filters Ø 1600 mm outlets 90 mm, The Vesuvio range covers both public and private pool sectors. Filters manufactured using the simultaneous projection of resin and fiberglass. Patented screwless rapid sealing system. Upper rim of Ø 210 mm. Ø 1050 mm and Ø 1200 mm models are also available with an upper rim of Ø 400 mm. Height of filtering layer 0.6 m. Maximum working pressure of 2.5 kg/cm2.
Astralpool Jupiter High performance sand filter 9.5 m ^ 3 / h
€367.50
€525.00 -30%
Available in 5/6 days
Astralpool Jupiter High performance sand filter 9.5 m ^ 3 / h, ideal for private pools, made of polyester laminated with white fiberglass. 490 mm in diameter and 1.5 "connections. Equipped with pressure gauge, drain valve and transparent screwed plug. Selector valve not included. It is recommended to use with a glassy filter bed for better filtration. Compliant with UNI-EN 16582 and EN 16713
Astralpool Filter Ø 900 mm output 2″
€1,544.90
€2,207.00 -30%
Available in 5/6 days
Astralpool Filter Ø 900 mm output 2″, the filters are manufactured with polyester resin and fiberglass. The highness filtering layer is of 0,8m, That gives a major quality of filtration than the residential filter this increases the capacity to withhold the little particles. Prolongs the time saturation filtration of the layers saving energy consumption, water consumption and chemical products. The filter can be used as a single layer or multi-layer combine sand with gravel, glass or anthracite. Fast opening lid. Sand drain of 2 1/2″ in the bottom part of the filter, optional sand drain d.200mm. Optional interior finishing with vinylester for ozone treatment.
Astralpool Artic Plus filter 1200 mm diameter
€4,135.60
€5,908.00 -30%
Available in 5/6 days
Astralpool Artic Plus filter 1200 mm diameter, 4” connections, collector arms, - Laminated filter in polyester with fibreglass totally anticorrosive. - High-performance filter with filtration bed height of 1,2 m. - collector arms system made of PP with 0,3 mm slots, uniformly distributed in order to achieve a correct circulation of the water. - D400 mm lid, with AISI-316 stainless steel screws. - Gaskets in EPDM. - Very important: please notify if the installation will use sea water, if the backwash is done with air or with air/water and if the installation is outside.
Astralpool Pump Victoria Plus Silent VS – 2CV
€1,540.00
€2,200.00 -30%
Available in 5/6 days
Astralpool Pump Victoria Plus Silent VS – 2CV for residential pools, comes with a 1 hp or 2 hp motor, has variable speeds and can be automatically controlled. This pump has been designed for both new-build pools and as a replacement for pumps already fitted. Significant power savings can be made thanks to the use of variable speeds and the timer. 
Zodiac FloPro 150M variable speed pump
FloPro pumps are designed with corrosion-resistant materials. The body of the pump is made of very thick glass fiber reinforced polypropylene, which makes it long-lasting and silent. Equipped with highly energy-efficient synchronous motors, the range is available in 9 models (from 0.5 to 2.0 HP) to meet the needs of most pools.
Astralpool Sail Filter for swimming pool mod.900
€1,043.00
€1,490.00 -30%
Available in 5/6 days
Astralpool Sail Filter for swimming pool mod.900. Manufactured in polyester resin and fiberglass, with excellent finishes. Equipped with a transparent cover with a ring-shaped closure with a screw, and 1 "threaded easy-to-remove manifold arms. The connections for the 6-position selector valve include filtration, discharge, closing, washing, rinsing and recirculation. Equipped with water and air discharge pressure gauge manual Maximum operating pressure 2.5 bar.
Astralpool Vesuvio Industrial filters Ø 1600 mm outlets 110 mm
€3,392.20
€4,846.00 -30%
Available in 5/6 days
Astralpool Vesuvio Industrial filters Ø 1600 mm outlets 110 mm, The Vesuvio range covers both public and private pool sectors. Filters manufactured using the simultaneous projection of resin and fiberglass. Patented screwless rapid sealing system. Upper rim of Ø 210 mm. Ø 1050 mm and Ø 1200 mm models are also available with an upper rim of Ø 400 mm. Height of filtering layer 0.6 m. Maximum working pressure of 2.5 kg/cm2.
Astralpool Jupiter High performance 15 m ^ 3 / h sand filter
€430.50
€615.00 -30%
Available in 5/6 days
Astralpool Jupiter High performance 15 m ^ 3 / h sand filter, ideal for private pools, made of polyester laminated with white fiberglass. With 625 mm diameter and 1.5 "connections. Equipped with pressure gauge, drain valve and transparent screwed plug. Selector valve not included. It is recommended to use with a glassy filter bed for better filtration. Compliant with UNI-EN 16582 and EN 16713.
Astralpool Aster Filter Ø 900 mm
€1,580.60
€2,258.00 -30%
Available in 5/6 days
Astralpool Aster Filter Ø 900 mm output 21/2″.The filters are manufactured with polyester resin and fiberglass. The highness filtering layer is of 0,8m, That gives a mayor quality of filtration than the residential filter this increases the capacity to withhold the little particles. Prolongs the time saturation filtration of the layers saving energy consumption, water consumption and chemical products. The filter can be used as a single layer or multi-layer combine sand with gravel, glass or anthracite. Fast opening lid. Sand drain of 2 1/2″ in the bottom part of the filter, optional sand drain d.200mm. Optional interior finishing with vinylester for ozone treatment.
Astralpool Filter Ø 500 outlets 1 ½2 Ø 400 mm injected lid
€485.10
€693.00 -30%
Available in 5/6 days
Astralpool Filter Ø 500 outlets 1 ½2 Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. CHARACTERISTICS: – Bobbin-wound sand filters in polyester/fiberglass resin. – Cover of Ø 240 mm with screw closure, die-injected. – Blue satin-finish, with dust protection with a clear polyurethane flash coat. – Equipped with collectors and diffusers of highly resistant PVC and PP plastic. – Inner coating of HDPE (polyethylene) blown.
Astralpool Victoria Plus Silent Pump single phase
€415.10
€593.00 -30%
Available in 5/6 days
Astralpool Victoria Plus Silent Pump single phase, the new generation of filtration pumps. Self-priming pump with a range from 1/2 Hp up to 3 Hp, and are provided with both single‐phase motors and three‐phase motors. A pre‐filter has been integrated into the body of the pump. The motors supplied with the motor pump unit have been protected with IP‐ 55 protection and are adapted to external thread Victoria Plus withstand hot atmospheres and high humidity levels.
Zodiac FloPro 150T variable speed pump
FloPro™ pumps are designed with corrosion-resistant materials. The body of the pump is made of very thick glass fiber reinforced polypropylene, which makes it long-lasting and silent. Equipped with highly energy-efficient synchronous motors, the range is available in 9 models (from 0.5 to 2.0 HP) to meet the needs of most pools.
Astralpool Twin Cover underground technical room 22 mc
€972.30
€1,389.00 -30%
Available in 5/6 days
Astralpool Twin Cover underground technical room 22 mc. New generation reinforced fiberglass cockpit, fitted with a walkable lid with hinges that facilitate the filtration system management operations. Suitable for filters with a maximum diameter of 770 mm. the new cover with a non-slip surface complies with the UNI-EN 13451 standards.
Astralpool Vesuvio Industrial filters Ø 1600 mm outlets 125 mm
€3,437.70
€4,911.00 -30%
Available in 5/6 days
Astralpool Vesuvio Industrial filters Ø 1600 mm outlets 125 mm, The Vesuvio range covers both public and private pool sectors. Filters manufactured using the simultaneous projection of resin and fiberglass. Patented screwless rapid sealing system. Upper rim of Ø 210 mm. Ø 1050 mm and Ø 1200 mm models are also available with an upper rim of Ø 400 mm. Height of filtering layer 0.6 m. Maximum working pressure of 2.5 kg/cm2.
Astralpool Jupiter High performance 18 m ^ 3 / h sand filter
€513.10
€733.00 -30%
Available in 5/6 days
Astralpool Jupiter High performance 18 m ^ 3 / h sand filter, ideal for private pools, made of polyester laminated with white fiberglass. With 690 mm diameter and 2 "connections. Equipped with pressure gauge, drain valve and transparent screwed plug. Selector valve not included. It is recommended to use with a glassy filter bed for better filtration. Compliant with UNI-EN 16582 and EN 16713.
Atralpool Norma Filter 10.000 l/h Ø 650 mm
€3,468.50
€4,955.00 -30%
Available in 5/6 days
Atralpool Norma Filter 10.000 l/h Ø 650 mm outlets 90-75 mm Laminated filter in polyester reinforced with fiberglass (PRFV). Filtration bed can be of single or multilayer. Maximum working pressure 2.5 kg/cm2. Complies with DIN standard 19643/19605. Collector system with nozzle plate (0.5 mm slot). Fitted with sight glass, sand dump port, lateral manhole, pressure gauge and manual air vent and water purge. Top sand charge lid Ø 200 mm and manhole Ø 200 mm or Ø 400 mm according to model type. PVC and PP internal components. A4 bolts and EPDM gaskets. Options: Interior vinylester coating (resistant to ozone concentrations <0.4 ppm) and maximum temperature of 40ºC. Standard colour: Ivory.
Astralpool Filter Ø 600 outlets 1 ½” Ø 400 mm injected lid
€570.50
€815.00 -30%
Available in 5/6 days
Astralpool Filter Ø 600 outlets 1 ½” Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. CHARACTERISTICS: – Bobbin-wound sand filters in polyester/fiberglass resin. – Cover of Ø 240 mm with screw closure, die-injected. – Blue satin-finish, with dust protection with a clear polyurethane flash coat. – Equipped with collectors and diffusers of highly resistant PVC and PP plastic. – Inner coating of HDPE (polyethylene) blown
Astralpool Victoria Plus Silent Pump Three Phase
€401.80
€574.00 -30%
Available in 5/6 days
Astralpool Victoria Plus Silent Pump Three Phase, the new generation of filtration pumps. Self-priming pump with a range from 1/2 Hp up to 3 Hp, and are provided with both single‐phase motors and three‐phase motors. A pre‐filter has been integrated into the body of the pump. The motors supplied with the motor pump unit have been protected with IP‐ 55 protection and are adapted to external thread Victoria Plus withstand hot atmospheres and high humidity levels.
Zodiac FloPro 200M single speed pump
FloPro pumps are designed with corrosion-resistant materials. The body of the pump is made of very thick glass fiber reinforced polypropylene, which makes it long-lasting and silent. Equipped with highly energy-efficient synchronous motors, the range is available in 9 models (from 0.5 to 2.0 HP) to meet the needs of most pools.
Astralpool Twin Cover Pro Underground technical room 30 mc
€1,304.80
€1,864.00 -30%
Available in 5/6 days
Astralpool Twin Cover Pro Underground technical room 30 mc. New generation reinforced fiberglass cockpit, fitted with a walkable lid with hinges that facilitate the filtration system management operations. Suitable for filters with a maximum diameter of 920 mm. the new cover with a non-slip surface complies with the UNI-EN 13451 standards.
Astralpool Jupiter High-performance sand filter 22 m ^ 3 / h
€596.40
€852.00 -30%
Available in 5/6 days
Astralpool Jupiter High-performance sand filter 22 m ^ 3 / h, ideal for private pools, made of polyester laminated with white fiberglass. With 760 mm diameter and 2 "connections. Equipped with pressure gauge, drain valve and transparent screwed plug. Selector valve not included. It is recommended to use with a glassy filter bed for better filtration.
Astralpool Norma Filter 15.000 l/h Ø 800 mm
€3,906.00
€5,580.00 -30%
Available in 5/6 days
Astralpool Norma Filter 15.000 l/h Ø 800 mm outlets 90-75 mm Laminated filter in polyester reinforced with fibreglass (PRFV). Filtration bed can be of single or multilayer. Maximum working pressure 2.5 kg/cm2. Complies with DIN standard 19643/19605. Collector system with nozzle plate (0.5 mm slot). Fitted with sight glass, sand dump port, lateral manhole, pressure gauge and manual air vent and water purge. Top sand charge lid Ø 200 mm and manhole Ø 200 mm or Ø 400 mm according to model type. PVC and PP internal components. A4 bolts and EPDM gaskets. Options: Interior vinylester coating (resistant to ozone concentrations <0.4 ppm) and maximum temperature of 40ºC. Standard colour: Ivory.
Astralpool Filter Ø 750 outlets 2″ Ø 400 mm injected lid
€929.60
€1,328.00 -30%
Available in 5/6 days
Filter Ø 750 outlets 2″ Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. CHARACTERISTICS: – Bobbin-wound sand filters in polyester/fiberglass resin. – Cover of Ø 240 mm with screw closure, die-injected. – Blue satin-finish, with dust protection with a clear polyurethane flash coat.  - Equipped with collectors and diffuser of highly resistant PVC and PP plastic. – Inner coating of thermoformed ABS.
Astralpool 230 V II Glass Plus Pumps
€424.20
€606.00 -30%
Available in 5/6 days
Astralpool 230 V II Glass Plus Pumps, are manufactured in advanced synthetic material and resistant to heat and corrosion. Motor protection IP-55. Lid-locking nut system. Single phase motors have in-built thermal protection. The pump housing has an in-built strainer basket. There cannot be any electrical connection with water as no motor part in contact with it. Flow rates are given at 10 m head. 3.000 rpm.
Zodiac FloPro 200T single speed pump
FloPro™ pumps are designed with corrosion-resistant materials. The body of the pump is made of very thick glass fiber reinforced polypropylene, which makes it long-lasting and silent. Equipped with highly energy-efficient synchronous motors, the range is available in 9 models (from 0.5 to 2.0 HP) to meet the needs of most pools.
Astralpool Twin Cover Flat Underground technical space 33 mc
€1,390.90
€1,987.00 -30%
Available in 5/6 days
Astralpool Twin Cover Flat Underground technical space 33 mc. New generation reinforced fiberglass cockpit, fitted with a walkable lid with hinges that facilitate the management of the filtration system, with a flat bottom. Suitable for filters with a maximum diameter of 920 mm. the new cover with a non-slip surface complies with the UNI-EN 13451 standards.
Astralpool Vesuvio Industrial filters Ø 1800 mm outlets 110 mm
€4,755.10
€6,793.00 -30%
Available in 5/6 days
Astralpool Vesuvio Industrial filters Ø 1800 mm outlets 110 mm, The Vesuvio range covers both public and private pool sectors. Filters manufactured using the simultaneous projection of resin and fiberglass. Patented screwless rapid sealing system. Upper rim of Ø 210 mm. Ø 1050 mm and Ø 1200 mm models are also available with an upper rim of Ø 400 mm. Height of filtering layer 0.6 m. Maximum working pressure of 2.5 kg/cm2.
Astralpool Jupiter sand filter 31 m ^ 3 / h
€777.00
€1,110.00 -30%
Available in 5/6 days
Astralpool Jupiter sand filter 31 m ^ 3 / h high-performance ideal for private pools, made of polyester laminated with white fiberglass. 900 mm diameter and 2 "connections, with 640 mm filter bed. Equipped with pressure gauge, drain valve and transparent screwed plug. Selector valve not included. It is recommended to use with a glassy filtering bed for better filtration.
Astralpool Norma Filter 23.000 l/h Ø 1.000 mm
€5,702.90
€8,147.00 -30%
Available in 5/6 days
Astralpool Norma Filter 23.000 l/h Ø 1.000 mm outlets 90-75 mm Laminated filter in polyester reinforced with fibreglass (PRFV). Filtration bed can be of single or multilayer. Maximum working pressure 2.5 kg/cm2. Complies with DIN standard 19643/19605. Collector system with nozzle plate (0.5 mm slot). Fitted with sight glass, sand dump port, lateral manhole, pressure gauge and manual air vent and water purge. Top sand charge lid Ø 200 mm and manhole Ø 200 mm or Ø 400 mm according to model type. PVC and PP internal components. A4 bolts and EPDM gaskets. Options: Interior vinylester coating (resistant to ozone concentrations <0.4 ppm) and maximum temperature of 40ºC. Standard colour: Ivory.
Astralpool Filter Ø 900 outlets Ø 400 mm injected lid
€1,267.00
€1,810.00 -30%
Available in 5/6 days
Astralpool Filter Ø 900 outlets Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. CHARACTERISTICS: – Bobbin-wound sand filters in polyester/fiberglass resin. – Cover of Ø 240 mm with screw closure, die-injected. – Blue satin-finish, with dust protection with a clear polyurethane flash coat. – Equipped with collectors and diffusers of highly resistant PVC and PP plastic. – Fitted with pressure gauge and manual air and water bleeder valves, includes sand drain of 2 1/2″ sand purge. – Side-mount, 6+1 way selector valve for filter, backwash, rinse, recirculate, waste and closed. – Inner coating of thermoformed ABS. – Filter base manufactured in plastic and polyester and fiberglass for larger diameters.