Calpeda GQRM 10-18 single-phase submersible electric pump for drainage without float switch
Calpeda GQRM 10-18 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQRM 10-20 single-phase submersible electric pump for drainage without float switch
Calpeda GQRM 10-20 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQRM 10 32-10 single-phase submersible electric pump for drainage without float switch
Calpeda GQRM 10 32-10 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQRM 10 32-12 single-phase submersible electric pump for drainage without float switch
Calpeda GQRM 10 32-12 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQRM 10 32-14 single-phase submersible electric pump for drainage without float switch
Calpeda GQRM 10 32-14 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQRM 10 32-16 single-phase submersible electric pump for drainage without float switch
Calpeda GQRM 10 32-16 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQRM 10 32-18 single-phase submersible electric pump for drainage without float switch
Calpeda GQRM 10 32-18 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQRM 10 32-20 single-phase submersible electric pump for drainage without float switch
Calpeda GQRM 10 32-20 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQS 50-8 three-phase submersible pump for dirty water without float switch
Calpeda GQS 50-8 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQS 50-9 three-phase submersible pump for dirty water without float switch
Calpeda GQS 50-9 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQS 50-11 three-phase submersible pump for dirty water without float switch
Calpeda GQS 50-11 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQS 50-13 three-phase submersible pump for dirty water without float switch
Calpeda GQS 50-13 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQS 50-15 three-phase submersible pump for dirty water without float switch
Calpeda GQS 50-15 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQSM 50-8 single-phase submersible pump for dirty water without float switch
Calpeda GQSM 50-8 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQSM 50-9 single-phase submersible pump for dirty water without float switch
Calpeda GQSM 50-9 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQSM 50-11 single-phase submersible pump for dirty water without float switch
Calpeda GQSM 50-11 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQSM 50-13 single-phase submersible pump for dirty water without float switch
Calpeda GQSM 50-13 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda GQSM 50-15 single-phase submersible pump for dirty water without float switch
Calpeda GQSM 50-15 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.
Calpeda MPS 303 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 303 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 304 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 304 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 305 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 305 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 306 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 306 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 307 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 307 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 503 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 503 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 504 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 504 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 505 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 505 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 506 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 506 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPS 507 5" three-phase submersible multistage electric pump for clean water
Calpeda MPS 507 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 303 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 303 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 303-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 303-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 304-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 304-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 305-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 305-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 306-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 306-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 307-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 307-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 503-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 503-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 504-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 504-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 505-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 505-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 506-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 506-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 507-CG 5" single-phase submersible multistage electric pump for clean water with float switch
Calpeda MPSM 507-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 304 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 304 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 305 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 305 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 306 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 306 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 307 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 307 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 503 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 503 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 504 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 504 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 505 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 505 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 506 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 506 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.
Calpeda MPSM 507 5" single-phase submersible multistage electric pump for clean water
Calpeda MPSM 507 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.